No products in the cart.
Medical, Patient Monitors
BM7
BM7 is a patient monitor that offers 12.1” touch screen display with 8 waveforms providing clear parameters such as ECG, SpO2, NiBP, Respiration, 2IBP, 2 Temperature, EtCO2, and multi-gas analyzer.
BM7 offers clear parameters & user-friendly usability with excellent network connectivity
Features
Parameter versatility from recovery to post-op
- BM7 offers wide application coverage from recovery ward up to ICU, pre-op, post-op, & quick surgery application with Bionet’s engineering BMGA Multi-gas analyzer as well as main and side stream EtCO2 capnography.
User friendly display design & Interface
- 12.1″ LCD touch screen that displays clear and enlarged parameters, allowing care-givers to get access to operational measurement in tip of their fingers.
Pop up menu
- All Bionet patient monitors offer Pop-up trend for ECG events with ST segment analysis for easy recognition.
INOP alarm
- Adds operational values with informing users to acknowledge immediate physiological & technical alarms of IEC60601-1-8 requirement.
Excellent network connectivity
- Features care-givers’ workflow demand from patient admission to discharge with barcode readers and ID by direct HL7 interface. Its central connectivity allows up to 64 monitors (16 wireless monitors) that permits users to manage patient data with remote NIBP triggering, alarm settings, and exporting to HER.
Advanced parameters & analysis for accurate patient care
- OXY CRG for neonatal respiratory care with ECG, SpO2, Respiration
- Arrhythmia, ST segment detection
- Pace-maker detection
- EtCO2 from Respironics for intensive care respiratory monitor
- Two NIBP module options available: Bionet or Suntech
- Anesthesia multi-gas analyzer : CO2, N2O, ENF, ISO, SEV, HAL, O2 ( optional filter )
Enhanced data management & storage capacity
- 168 hrs of patient trend data storage of graphic & tabular trend
- 20 event alarm trends with 10 sec waveform
- Patient’s data transfer by external USB memory in CSV file
- USB Barcode & QRS scanner for patient data registration
- Event management with 20 cases with 10 sec alarm wave-form
- Allows screen freeze ON/OFF for emergency
Excellent network connectivity
- Bed to Bed connection among all Bionet patient monitoring systems up to 8 monitors
- User-friendly DHCP network function with AUTO AP search
- Direct HL7 interface
- USB Barcode & QRS scanner for patient data registration
- Wired/wireless connections to BMS Bionet central monitoring system up to 64 monitors with dual monitor (wired) & 16 monitors (wireless)
User friendly, portable design
- Rechargeable Li-ion battery with 3hr operation
- INOP alarm system for better alarm recognition
- Up to date bed rail hook integrated design
Various Display Mode
6 Waveform Display
Bed to Bed display with two waveform
Bed to Bed display with numeric data
Multi-display mode for user's preference
168 hrs of graphic trend
168 hrs of tabular trend
Popup Trend Display
NIBP Window trend
ST pop up trend
Patient’s data transfer with CSV file to external USB memory
| Parameters | Product Specifications | Value |
|---|---|---|
| Hardware specification | Dimension (H x W x D) | 324 x 257 x 218 mm |
| Weight | Approx. 4.5kg | |
| Power | AC 100-240V (50/60Hz), Adapter 18 V, 2.8 A | |
| Display | 12.1"color TFT LCD | |
| Resolution | 1024 x 768 pixels | |
| Parameters | ECG, Heart Rate, Respiration Rate, SpO2, Pulse Rate, Systolic BP, Diastolic BP, Mean BP, 2 x Temperature, 2 x IBP, EtCO2, FiCO2, Airway Respiration Rate, Anesthetic Gas Concentration in inhalation and exhalation | |
| Traces | 6 waveforms : 2*ECG, SpO2, RR or EtCO2 or MGAS, 2*IBP Sweep speed : 6.25, 12.5, 25, 50 mm/sec | |
| Indicators | Categorized alarms (3 priority levels) Visual alarm lamp handle QRS beep & SpO2 pulse beep Percent(%) SpO2 pitch tone External power LED, Battery status Touch screen, rotary knob | |
| Interfaces | DC input connector: 18VDC, 2.8A LAN digital output for transferring data Nurse call system connection: • 0.3A at 125VAC • 1A at 24VDC DC output: 5VDC, 1A (Max) External monitor connection: HDMI USB barcode reader USB data storage | |
| Battery | Rechargeable Li-ion battery 2 hours for continuous operation (Option: using additional battery, total of 4 hours) | |
| Thermal Printer (optional) | Speed : 25, 50mm/sec Paper width : 58mm | |
| Data Storage | 168 hours trends data, 20 cases of 10 sec alarm waveform | |
| Language | English, French, Spanish, Italian, Germany, Chinese, Russian, Czech, Bulgarian, Portuguese, Romanian, Hungarian, Turkish, Polish, Korean | |
| Environment | Temperature | Operation: 5 ~ +40 °C (41 ~ 104 °F) Storage: –20 ~ +60 °C (–4 ~ +140 °F) |
| Humidity | Operation: 30% ~ 85%, Storage: 10% ~ 95% (Package ) | |
| Altitude | Operation: 525 ~ 795 mmHg (70 ~ 106 kPa) Storage: 375 ~ 795 mmHg (50 ~ 106 kPa) | |
| ECG | Lead type | 3-lead, 5-lead |
| Lead Selection | 3-lead : I, II, III 5-lead : I, II, III, aVR, aVL, aVF, V | |
| ECG waveforms | 3-lead : 1 channel 5-lead : 2/7 channels | |
| Heart Rate Range | Adult : 30 – 300 bpm Neonate/Pediatric : 30 – 350 bpm | |
| Heart Rate Accuracy | ±1bpm or ±1%, whichever is greater | |
| Sweep speed | 6.25, 12.5, 25, 50 mm/sec | |
| Filter | Diagnosis: 0.05Hz ~ 150Hz Monitoring: 0.5 ~ 40 Hz Moderate: 0.5 ~ 25 Hz Maximum: 5 ~ 25 Hz | |
| S-T segment detection range | -2.0 to 2.0 mV | |
| Arrhythmia analysis | ASYSTOLE,VTACH,VFIB,BIGEMINY,ACCVENT, COUPLET,IRREGULAR, PAUSE,PVC,RONT,TRIGEMINY,VBRADY, SHORTRUN | |
| Pacemaker Detection Mode | Indicator on waveform display (user selectable) | |
| Protection | Against electrosurgical interference and defibrillation | |
| Respiration Performance | Method | Thoracic impedance |
| Channel selection | RA-LA or RA-LL | |
| Measurement range | 5 – 120 breaths per minute | |
| Accuracy | ±1 breath per minute | |
| Apnea alarm | Yes | |
| SpO2 Performance | Saturation range | 0 to 100% |
| Saturation accuracy | 70 to 100% ±2 digits 0 to 69% unspecified | |
| Pulse rate range | 30 to 254 bpm | |
| Pulse rate accuracy | ±2 bpm | |
| NIBP Performance | Method | Oscillometric |
| Operation Mode | Manual/Automatic/Continuous | |
| NIBP Performance | Measurement range | Systolic : 40 to 260 mmHg MAP : 26 to 220 mmHg Diastolic : 20 to 200 mmHg |
| Accuracy | mean error: less than ±5 mmHg standard deviation : less than 8 mmHg Meets accuracy requirements of ANSI/AAMI SP10:1992 and 2002 (*SunTech) | |
| Temperature Performance | Measurement range | 0 to 50℃ (32 to 122℉) |
| Accuracy | 25 to 50℃: ±0.1℃ 0 to 24℃: ±0.2℃ | |
| Compatibility | YSI Series 400 temperature probes | |
| IBP Performance (Optional) | Channels | 2 |
| Measurement range | -50 to 300mmHg | |
| Accuracy | Less than 100mmHg : ±1mmHg Equal or greater than 100mmHg : ±1% of reading | |
| Pulse rate measurement range | 0 to 300 BPM | |
| Zero balancing | Range : ±200mmHg Accuracy : ±1mmHg Drift : ±1mmHg over 24 hours | |
| Transducer sensitivity | 5µV/V/mmHg | |
| Sidestream CO2 (Optional) | Measurement range | 0 to 150 mmHg, 0 to 19% |
| Accuracy | 0-40mmHg ±2 mmHg, 41-70mmHg ±5% of reading 71-100mmHg ±8% of reading, 101-150mmHg ±10% of reading | |
| Respiration rate | 2 to 150 breaths per minute | |
| Respiration accuracy | ±1 breath per minute | |
| Measurement range | 0 to 150 mmHg, 0 to 19% | |
| Accuracy | 0-40mmHg ±2 mmHg, 41-70mmHg ±5% of reading 71-100mmHg ±8% of reading, 101-150mmHg ±10% of reading | |
| Respiration rate | 0 to 150 breaths per minute | |
| Respiration accuracy | ±1 breath per minute | |
| Anesthetic GAS/O2 - Phasein (Optional) | Method | Infra-red absorption characteristic |
| Gas | CO2, O2, N2O, Des, Iso, Enf, Hal, Sev | |
| Warm-up time | Main stream (IRMA AX+): • Iso accuracy mode: 45s • Full accuracy mode : 60s Side stream (ISA OR+/ AX+) : <20s | |
| Sample flow rate (for ISA OR+/AX+) | 50 ± 10 ml/min | |
| Measuring Range | CO2 : 0 ~ 15 % N2O: 0 ~ 100% Hal/Iso/Enf: 0 ~ 8% Sev: 0~10% Des: 0 ~ 22% O2: 0 ~ 100%(ISA OR+/AX+) | |
| Respiratory Rate | 0 ~ 150bpm ± 1bpm |
New Version of Bionet BM Series
| wdt_ID | Item | Type | Download |
|---|---|---|---|
| 3 |  | Brochure | Download |
Related products
-
Medical, Fetal Monitors
FC700-FetalCare
Fetal monitor for single fetus care of the next generation with enhanced & accurate cardiotocograph alogorithm
FC700-FetalCare is a fetal monitor for single fetus care with enhanced & accurate cardiotocography algorithm.
Features
Intuitive shortcut keys
- FC700 has simplifying keys for prompt access functions as well as streamlining workflow to reduce patient and care-giver’s stress.
Distinctive 7 segment LED
- Easy to recognize with bright 7 segment LED for patient data and operational advice without data confusion for FHR and UC
All-in-one but affordable
- With the single fetus features, CTG and NST are integrated as standard coming with detailed final report & print-out.
FC Central (Fetal central monitoring connectivity)
- All Bionet fetal monitors have integrated CTG and NST as it features with detailed final report review and print-out.
SKU: n/a -
Medical, ECG
CardioTOUCH 3000
CardioTOUCH 3000 is an ECG machine that features 12 channel interpretation with real-time preview monitor that compatible with USB, LAN, Wi-Fi technology.
Captures , stores, analyzes, and transmits by simplifying workflow with user-friendly usability
Features
Simplifying workflow with “AUTO” operation
- One button “AUTO” operation from acquisition to print-out & data record in 3 sec.
Easy ECG file data conversion
- Easy file conversion to PDF, XML, JPG, BMP, MFER, DICOM that transfers with easy user interface.
Enhanced sampling rate for data accuracy
- With 8,000Hz per second sampling rate, it is designed to improve clinical decision for cardiology with accurate ECG interpretation algorithm
BMS Plus Patient data management in mind
- All patient data is transferable to BMS Plus and PC based data management SW with real time remote operation.
BMS plus offers caregivers the workflow flexibility for
- Data preview
- Device remote control
- File conversion to PDF, XML, JPG, BMP, MFER, DICOM for data transfer through PACS.
- Direct print-out, magnifying and comparing ECG trace, measuring ECG complex, adding comments
SKU: n/a -
Medical, Patient Monitors
BM1
BM1 is a patient monitor that offers 7″ touch screen display providing clear parameters with EtCO2, NIBP, SpO2, and Temperature
Versatile, portable, & lightweight, the compact design that carries immediate clinical decision
Features
Versatile mode with EWS
- BM1 offers versatile modes of spot and continuous vital signs monitoring with 5 EWS (Early Warning Score) and user-configurable scoring menus ( Early Warning Score ) for prompt clinical decision for EMS up to recovery patient situation
Excellent network connectivity
- Features care-givers’ workflow demand from patient admission to discharge with barcode readers and ID by direct HL7 interface. With its portable/wireless user-interface, users can manage and retrieve patient data with remote NIBP triggering, alarm settings, and exporting to EHR.
Patient data management in mind
- Enhanced patient data storage up to 5,000 cases that can cover large workloads with single-rolling stand as well as wireless connectivity.
SKU: n/a -
Medical, Fetal Monitors
FC Central II
Convenient new fetal care monitoring system
FC Central II is a fetal care monitoring system that provides up to 16 fetal monitor wireless & wired connections with real time viewer at different locations with client S/W.
Features
- Bionet’s multiple central fetal monitoring systems up to 16 beds
- Wired/wireless connection by LAN or USB converter
- Remote control & real time data synchronization
- Real-time monitoring & trend review
- Multiple waveform display
- Separate Server & multiple client’s viewer connectivity
- Effective data management by receiving and transferring to EMR
SKU: n/a